Ima Group Performance - Last 7 Days - ZyXEL Communications MSC1000G User Manual

Chapter 12 Statistics Screens
Table 260 IMA Statistics: IMA Line Card: Group 96Q (continued)
LABEL
Page X of X
Next
Next 10

12.24.13 IMA Group Performance - Last 7 Days

Use this screen to display the performance of an IMA group collected during the specified days of
the past 7 days. Click the slot number in the Statistics > IMA screen, the index number of the IMA
group (see Figure 332 on page
Figure 344 IMA Statistics: IMA Line Card: Group 7Day
The following table describes the labels in this screen.
Table 261 IMA Statistics: IMA Line Card: Group 7Day
LABEL
Start day
End day
Load
Refresh
collected interval
IMAUAS(secs)
NE-Failures
FE-Failures
Previous
506
DESCRIPTION
This identifies which page of information is displayed and the total number of pages of
information.
Click Next to show the following screen if the information cannot be displayed in one
screen.
Click Next 10 to show the following 10 pages of alarms.
491) and then the Group 7Day tab, the following screen opens.
DESCRIPTION
Enter the starting day within the past 7 days between 1 to 7.
Enter the ending day within the past 7 days between 1 to 7. This ending day must be
equal to or greater than the starting day.
Click this to display the IMA group statistics collected during the specified days.
Click this to update this screen.
This field displays the queried interval (in week day, date, time and year format) during
which the following statistics were collected.
This field displays the number of UnAvailable Seconds detected in this IMA group within
the specified period.
This field displays the number of upstream failures detected in this IMA group within the
specified period.
This field displays the number of downstream failures detected in this IMA group within
the specified period.
Click Previous to show the preceding screen if the information cannot be displayed in
one screen.
Management Switch Card User's Guide