Static Mac Multicast Slot Screen - ZyXEL Communications MSC1000G User Manual

Management switch card

Hide thumbs Also See for MSC1000G:

Table of Contents

Chapter 8 Multicast Screens

Table 81 Static MAC Multicast (continued)

8.6.1 Static MAC Multicast Slot Screen

Click Multicast > Static MAC Multicast in the navigation panel to display the Static Multicast

screen. Type a VID and a group IP and click Apply to display entries in the first table. Click the

index number of an active line card to open the following screen. Use this screen to set which of the

line card's ports belong to the static multicast group.

Figure 120 Static MAC Multicast Slot

Select a static multicast group's radio button and click Delete to remove the static multicast

This is the number of the VLAN that this static multicast group uses.

This is the static multicast MAC address.

This section lists the VLAN membership setting of the ports on the management switch card.

An "F" indicates that the port is a permanent member of the static multicast group. An "X"

indicates that the port is forbidden (blocked) from joining the static multicast group. An "-"

indicates that the port is a normal member and can join the VLAN dynamically. See

for more on VLAN registration.

This section displays the numbers of any slots that are fixed members of the static multicast

group. All other slots are represented by a "-".

Select a static multicast group's radio button and then click Modify to be able to edit it or

click Delete to remove it.

Management Switch Card User's Guide

Show Quick Links

Table of Contents

Msc1024g Msc1224g Msc1024gb Msc1024gc Msc1224gb