ZyXEL Communications MSC1000G User Manual page 389

In the Number of Queues field, select 8.
1c
Click Apply.
1d
Apply the IPQoS Profile to Port 1
2
In the navigation panel, click Port > VDSL to open the VDSL Port Setup screen.
2a
Figure 246 VDSL Port Setup Screen 1 PVC 8 Queues Example
Select the slot where the line card is installed and port 1. Click Load.
2b
In the IPQoS Profile field, select "1PVC_8Queues".
2c
Click Apply.
2d
Save the Settings
3
In the navigation panel, click Config Save > Config Save to open the VDSL Port Setup
3a
screen.
Figure 247 Config Save Screen
11.23.3.2 ADSL Mode: 3 PVCs for Triple Play Using SPQ Example
This example uses 3 PVCs to support triple play service. Strict priority queuing helps ensure voice
and video work properly. The backbone network and the system use IEEE 802.1Q VID 1 for voice,
VID 2 for video, and VID 3 for data. The VLC1348G in slot 6 has VDSL port 2 connected to an
ADSL2+ device and uses VPI/VCI 0/33 for voice, 0/34 for video and 0/35 for data. Each PVC has an
IPQoS profile. Voice is allocated 4.096 Mbps, video is allocated 10.24 Mbps and data is allocated
5.12 Mbps. Voice has the highest priority queue, video has the second highest priority queue, and
data uses the lowest.
Management Switch Card User's Guide
Chapter 11 Profile Screens
389