Online Users Screen - ZyXEL Communications MSC1000G User Manual

The following table describes the labels in this screen.
Table 199 IP Bridge Routes
LABEL
Domain
Index
Domain Name
Interface IP
NetMask
Nexthop
Metric
Priority
Type

12.10 Online Users Screen

Click Statistics > Online Users in the navigation panel to display the following screen. Use this
screen to view information about administrators that are logged into the system.
Figure 281 Online Users
The following table describes the labels in this screen.
Table 200 Online Users
LABEL
Session
User
Remote IP
Login Time
Management Switch Card User's Guide
DESCRIPTION
Select a domain for which you wish to view information and click Load to display it.
This field displays the number of the entry.
This field displays the name of the domain to which this entry applies.
These fields display the IP address and the number of bits in the subnet mask that define the
range of IP addresses to which this entry applies. If the destination IP address of a packet is
in this range, the system forwards the frame to the specified edge router.
This field displays the IP address to which the system forwards frames if the destination IP
address of a packet is in the specified range. It displays "-" if the field does not apply to the
entry (for example, in entries created automatically by the system).
This field displays the "cost" of transmission for routing purposes. It displays "-" if the field
does not apply to the entry (for example, in entries created automatically by the system).
This field displays the priority value (0 to 7) to add to incoming frames without a (IEEE
802.1p) priority tag. It displays "-" if the field does not apply to the entry (for example, in
entries created automatically by the system).
This field indicates whether this entry is used for upstream traffic (U) or downstream traffic
(D). By default, all entries are for downstream traffic, unless the edge router is configured in
the edge router screen (see
DESCRIPTION
This is the type of connection that the administrator is using (web, console, or telnet).
This is the user name that the administrator is using.
This is the IP address of the administrator's computer.
This displays the time and date that the administrator logged into the system. The time is in
(24-hour) hour, minute and second format. The date is in year, month and day format.
Section 9.17 on page 270).
Chapter 12 Statistics Screens
423