Chapter 9 Subscriber Port Setup Screens
9.7.2 ADSL Port Setup Advanced
Click Port > ADSL in the navigation panel to open the ADSL Port Setup screen. Click the slot
number of an active ADSL line card and click a port number to display the configuration screen. Use
this screen to configure an ADSL port's detailed settings.
Figure 133 ADSL Port Setup: Advanced
The following table describes the fields in this screen.
Table 96 ADSL Port Setup: Advanced
LABEL
UP
Apply
Cancel
216
DESCRIPTION
Click this to return to the previous screen.
Click Apply to save the changes in this screen to the system's volatile memory. The system
loses these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel and then the Save button to save your changes to the non-volatile memory
when you are done configuring.
Click Cancel to begin configuring the screen again.
Management Switch Card User's Guide