G.bond Statistics - ZyXEL Communications MSC1000G User Manual

The following table describes the labels in this screen.
Table 238 IPv6 Default Router List
LABEL
In-band/Out-of-
band
Index
Address
preference
lifetime
expire
flag

12.17 G.bond Statistics

To view G.bond settings and statistics, click Statistics > G.bond in the navigation panel.
Figure 322 G.bond Statistics
The following table describes the labels in this screen.
Table 239 IP Statistics
LABEL
Slot
Index
Name
Protocol Type
Member Port
Management Switch Card User's Guide
DESCRIPTION
This is the MSC's interface through which a router can be reached.
This is the index number of the entry.
This is the IPv6 address of the router.
This is the preference level (High, Medium or Low) of the router. If more than one
reachable router has the same preference level (High), the routers are selected in a round-
robin fashion.
This displays how long (in seconds) the address can be used before it expires.
This displays how long an address can be used before it expires.
This displays what the router tells hosts to use DHCPv6 to get. The possible values are:
M (Managed address configuration) means the router tells hosts to use DHCPv6 to get the
IPv6 prefix.
O (Other stateful configuration) means the router tells hosts to use DHCPv6 to get
additional configuration settings such as DNS information.
MO means the router tells hosts to use DHCPv6 to get both the IPv6 prefix and additional
configuration settings.
The field is blank if there is no DHCPv6 infrastructure. This means hosts should use router
advertisements for non-link-local addresses and other methods (manual configuration for
example) to configure other settings.
DESCRIPTION
Select the slot number of a line card. Click Load to show G.bond related statistics for the
selected line card.
This shows the index number of a DSL line bundle for which G.bond is configured.
This shows the descriptive name previously given to the DSL line bundle for which G.bond
is configured.
This shows the traffic type (PTM or ATM) of this bonding group.
This shows the ports allocated to the DSL lines in this G.bond bundle.
Chapter 12 Statistics Screens
481