E1 Port Setup Screen - ZyXEL Communications MSC1000G User Manual

Management switch card

Hide thumbs Also See for MSC1000G:

Table of Contents

Table 140 DTPVC Setup: Slot (continued)

9.30 E1 Port Setup Screen

Click Port > E1 in the navigation panel to open the following screen. Use this screen to view and

configure an E1 port's settings.

Figure 199 E1 Port Setup

The following table describes the fields in this screen.

Table 141 E1 Port Setup

Management Switch Card User's Guide

This field displays the IEEE 802.1p priority level for the service provider tag that the line card

adds to untagged frames that come in on this DTPVC. "0" is the lowest priority level and "7" is

the highest.

This is the customer VLAN ID (the outer VLAN tag) that the line card assigns to untagged frames

received on this channel.

This field displays the IEEE 802.1p priority level for the customer tag that the line card adds to

untagged frames that come in on this DTPVC. "0" is the lowest priority level and "7" is the

Select one or more PVCs' check boxes and then use the Delete button to remove it (or them).

Use the Select All check box to select all of the PVCs for all of the line card's ports.

This table displays the E1 port settings that are configured for the selected port.

Select the number of a line card's slot. The corresponding port setup screen for the type of line

card you selected automatically displays.

Select the number of an E1 port on the line card.

Click Load to display the port's settings in this screen.

Select this to turn this port on.

Chapter 9 Subscriber Port Setup Screens

Show Quick Links

Table of Contents

Msc1024g Msc1224g Msc1024gb Msc1024gc Msc1224gb