ZyXEL Communications MSC1000G User Manual page 489

Figure 330 OAM Statistics
The following table describes the labels in this screen.
Table 247 OAM Statistics
LABEL
Slot/Port
Local Client
Mode
Remote Loopback
Max. OAMPDU Size
Link Status
Info. Revision
Parser State
Management Switch Card User's Guide
DESCRIPTION
Select an Ethernet line card and slot number and click Load to show details.
This shows whether or not the port has OAM (Operational, Administration and
Maintenance) functionality enabled.
This shows whether or not the port has OAM remote loopback functionality enabled.
This is the largest OAM Protocol Data Unit the port can use for an OAM remote
loopback test (in bytes).
This is the port's connection status.
This field displays the current version of local state and configuration. This two-octet
value starts at zero and increments every time the local state or configuration
changes.
This field indicates the current state of the parser.
Forward: The packet is forwarding packets normally.
Loopback: The port is in loopback mode.
Discard: The port is discarding non-OAMPDUs because it is trying to or has put the
remote device into loopback mode.
Chapter 12 Statistics Screens
489