Ip Bridge Routes Screen - ZyXEL Communications MSC1000G User Manual

Chapter 12 Statistics Screens
Figure 279 IP Bridge Interfaces
The following table describes the labels in this screen.
Table 198 IP Bridge Interfaces
LABEL
Index
Domain
Interface IP,
NetMask
VID
Slot
Port
VPI/VCI

12.9 IP Bridge Routes Screen

Use this screen to look at the routing table for a domain. This table includes all the entries, whether
added automatically by the system or provided manually.
To open this screen, click Statistics > IP Bridge > Route.
Figure 280 IP Bridge Routes
422
DESCRIPTION
This field displays the index number of the downlink interface.
This field displays the name of the domain to which this entry applies.
These fields display the IP address and the number of bits in the subnet mask that define the
range of IP addresses to which this downlink interface applies. If the destination IP address of
a packet is in this range, the system tries to forward the frame to a subscriber in the specified
VLAN and PVC, if any.
This field displays the VLAN ID the subscriber is in.
This field displays the number of the slot that contains the line card with the port number to
which the system forwards frames.
This field displays the line card's port number to which the device is connected. It displays "-"
if the system looks for the subscriber in the whole VLAN and not a specific PVC.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI), if any.
The VPI and VCI identify a channel on this port.
Management Switch Card User's Guide