ZyXEL Communications MSC1000G User Manual page 284

Chapter 9 Subscriber Port Setup Screens
Figure 181 Port > VoIP SIP Screen
The following table describes the labels in this screen.
Table 129 Port > VoIP SIP Setup Screen
LABEL
Slot
Port
Load
Enable
Account
Password
Retype Password to
Confirm
SIP or Dialplan Profile
Call Service Profile
284
DESCRIPTION
Use the drop-down list boxes to select the port on an active VoIP line card you want to
configure.
Click this to display the port's current settings.
Select the check box to activate SIP-based VoIP on the specified port.
Enter the user name for registering the SIP account this port uses. Leave this blank to
use the name of the call service profile this port uses.
If you specified a SIP user name for this port in the Account field, enter the password
for registering the SIP account this port uses.
Re-type the password for registering the SIP account this port uses. Re-enter it
Select the SIP profile or dial plan the port is to use. A SIP profile contains information
about a connection to SIP-based VoIP provider's servers. A dial plan profile is a group
of dial plans. A dial plan identifies specific types of phone numbers dialed by a user,
and to process the number before transmission by deleting or adding digits according
to the relevant rule. A dial plan can also forward the call to a specific SIP server.
If you have not configured any profiles, only the default profile DEFVAL can be
selected. Configure SIP profiles in the Profile > VoIP SIP screen.
Select the call service profile the port is to use. A call service profile contains location-
related information, as well as details of the call services available to subscribers.
If you have not configured any profiles, only the default profile DEFVAL can be
selected. Configure call service profiles in the Profile > VoIP SIP CALLSVC screen.
Management Switch Card User's Guide