Secured Client6 Screen - ZyXEL Communications MSC1000G User Manual

14.3.2 Secured Client6 Screen

Click Sys > Access Control from the navigation panel and then the Secured Client6 tab to open
the following screen. Use this screen to configure IPv6 address ranges of trusted computers that
may manage the system.
Figure 390 Access Control: Secured Client6
The following table describes the labels in this screen.
Table 303 Access Control: Secured Client6
LABEL
Index
Enable
IP6 Address
IP6 Prefix
Telnet/SSH/SNMP/
FTP/Web/ICMP/
HTTPS
Management Switch Card User's Guide
DESCRIPTION
This is the client set index number. A "client set" is a group of one or more "trusted
computers" from which an administrator may use a service to manage the system.
Select this check box to activate this secured client set. Clear the check box if you wish to
temporarily disable the set without deleting it.
Configure the IPv6 address range of trusted computers from which you can manage the
system. The system checks if the client IP address of a computer requesting a service or
protocol matches the range set here and immediately disconnects the session if it does
not match.
Configure the IPv6 prefix length to specify how many most significant bits (starting from
the left) in the address compose the network address.
Select services that may be used for managing the system from the specified trusted
computers.
Chapter 14 Sys Screens
567