Multicast Mvlan Group Delete Command - ZyXEL Communications MSC1000G User Manual

This command creates a multicast VLAN group. The following example creates a multicast VLAN
with VID 10 and group index 1. The multicast address range is 224.224.224.1 ~ 224.224.224.10.
ras> multicast mvlan group set 10 1 224.224.224.1 224.224.224.10

28.11.6 multicast mvlan group delete Command

Syntax:
multicast mvlan group delete <vid> <index>
This command removes the specified multicast VLAN group configuration.
28.11.7 multicast mvlan name Command
Syntax:
multicast mvlan name <vid> <name>
This command sets the name of the multicast VLAN. The following example sets the name of the
multicast VLAN (VID =10) to "
ras> multicast mvlan name 10 example
28.11.8 multicast mvlan set Command
Syntax:
multicast mvlan set <vid> <slot-port> fix|forbid
where
fix|forbid =
This command sets a multicast VLAN and the allowed/blocked port member(s).
The following example creates a multicast VLAN (VID =10) and sets port 1 on the line card in slot 3
to be a member of this multicast VLAN.
ras> multicast mvlan set 10 3-1 fix
28.11.9 multicast mvlan show Command
Syntax:
multicast mvlan show [vid]
Management Switch Card User's Guide
".
example
Sets the port to be a permanent member of this multicast VLAN.
fix:
: Blocks the port from joining this multicast VLAN. The port will not
forbid
accept multicast traffic from this multicast VLAN.
Chapter 28 multicast Commands
751