Table 57 Alarm Port Setup (continued)
LABEL
State
Card Type
Up Time
Firmware
5.3.1 Alarm Port Setup Slot Screen
Click the slot number of a line card in the Alarm Port Setup screen to display the screen shown
next.
Figure 82 Alarm Port Setup: Slot
Management Switch Card User's Guide
DESCRIPTION
This field displays the line card's current operational status.
active means the line card is operating normally.
init means the MSC is initializing the line card.
disable means a manager has disabled the line card.
inactive means the line card is starting up or is not operating normally. This could be due
to the card starting, a firmware upgrade in progress or a malfunction. See
page 1111
for what to do if the line card stays stuck in the inactive state.
This field displays the type of a line card.
This field displays how long the line card has been running since the last time it was
started.
This field displays the current firmware version installed on the line card.
Chapter 5 Alarm Screens
Section 38.7 on
151