ZyXEL Communications MSC1000G User Manual page 495

Figure 334 IMA Statistics: IMA Line Card: Group Detail: Link Detail
The following table describes the labels in this screen.
Table 251 IMA Statistics: IMA Line Card: Group Detail: Link Detail
LABEL
RelDelay(ms)
Violations
OifAnomalies
NeSevErroredSecs
(secs)
FeSevErroredSecs
(secs)
NeUnavailSecs(sec
s)
FeUnavailSecs(sec
s)
Management Switch Card User's Guide
DESCRIPTION
This field displays the least delay in milliseconds measured most recently on this link
compared to the other links in the same IMA group.
This field displays the total number of ICP Violations on this link including the number of
errored, invalid or missing ICP cells, except during an SES (Severely Errored Seconds) or
a UAS (UnAvailable Seconds) condition.
The field displays the number of Out of IMA Frame (OIF) anomalies, except during SES-
IMA or UAS-IMA conditions, at the near-end.
The field displays the number of seconds containing >= 30% of the ICP cells counted as
IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects, or
LODS defects, except during UAS-IMA condition.
The field displays the number of seconds containing one or more RDI-IMA defects, except
during UAS-IMA-FE condition.
The field displays the number of unavailable seconds detected at the near-end (on the
IMA line card).
The field displays the number of unavailable seconds detected at the far-end (on the
remote IMA device).
Chapter 12 Statistics Screens
495