Ipqos Profile Screen - ZyXEL Communications MSC1000G User Manual

Chapter 11 Profile Screens
Click Apply.
6f
Save the Settings
7
In the navigation panel, click Config Save > Config Save to open the VDSL Port Setup
7a
screen.
Figure 265 Config Save Screen

11.23.4 IPQoS Profile Screen

Click Profile > IPQoS in the navigation panel to open the following screen. Use this screen to
configure QoS (Quality of Service) profile setting for each traffic queue.
Use the top part of the screen to add or edit IPQoS profiles. The bottom of the screen lists the
configured IPQoS profiles. See
The IES classifies traffic into queues based on IEEE 802.1P tags,
After you configure the IPQoS profiles here, you apply them to VDSL ports or ADSL PVCs.
Figure 266 IPQoS Profile
The following table describes the fields in this screen.
Table 184 IPQoS Profile
LABEL
Name
Number of
Queues
400
Section 13.4 on page 514
DESCRIPTION
Type a name to identify the IPQoS profile (you cannot change the name of the DEFVAL profile).
You can use up to 31 English keyboard characters; spaces are not allowed.
Select the number of queues used to classify traffic. You can select 1, 2, 4 or 8 queues in an
IPQoS profile depending on the number of applications you want to classify.
Note: It's highly recommended to use 8 queues for traffic classification.
for more on traffic queuing.
Management Switch Card User's Guide