ZyXEL Communications MSC1000G User Manual page 426

Chapter 12 Statistics Screens
Figure 284 MSC Port Statistics: ENET Details
The following table describes labels in this example.
Table 203 MSC Port Statistics: ENET Details
LABEL
Status
Rate
Uptime
Flush
Refresh
Bytes
Pkts
kbytes/s
UcastPkts
NUcastPkts
MCastPkts
426
DESCRIPTION
This shows whether or not the port has an active connection.
This shows the connection speed for an active connection.
This shows how long the connection has been active.
Click Flush to clear the counters.
Click Refresh to update this screen.
This is the number of octets of Ethernet frames received/transmitted that are from 0 to
1518 octets in size, counting the ones in bad packets, not counting framing bits but
counting FCS (Frame Check Sequence) octets. An octet is an 8-bit binary digit (byte).
This is the number of packets received/transmitted on this port (including multicast,
unicast, broadcast and bad packets).
This is the number of octets of Ethernet frames received/transmitted per second.
This is the number of good unicast frames received/transmitted.
This is the number of good non-unicast frames received/transmitted.
This is the number of good multicast frames received/transmitted of 64 to 1518 octets in
length (for non VLAN) or 1522 octets (for VLAN), not including Broadcast frames. Frames
with range or length errors are also not taken into account.
Management Switch Card User's Guide