Switch Cfm Lbr Screen - ZyXEL Communications MSC1000G User Manual

Figure 376 CFM Endpoint: MIP > Slot
The following table describes the labels in this screen.
Table 290 CFM Endpoint: MIP > Slot
LABEL
Port
Enable

13.19.5 Switch CFM LBR Screen

Click Switch > CFM > LBR to display the screen shown next. Use this screen to enable or disable
loopback testing on individual ports. LBR stands for Loop Back Response.
Management Switch Card User's Guide
DESCRIPTION
This field displays the number of the DSL port.
This field displays whether or not the port is set to be a MIP.
Chapter 13 Switch Screens
545