ZyXEL Communications MSC1000G User Manual page 461

Table 220 VOP Port Statistics Details (continued)
LABEL
RTP Tx Payload
Type
RTP Rx Payload
Type
RTP Local IP
RTP Remote IP
RTP Local Port
RTP Remote Port
RTP Statistics
RTP Tx Rate
RTP Rx Rate
RTP Tx Packet
Counter
RTP Rx Packet
Counter
RTP Tx Jitter
RTP Rx Jitter
Management Switch Card User's Guide
DESCRIPTION
This shows the voice codec currently used for transmitting voice on this port. The
supported codecs can be configured in each DSP profile (in the VoIP > DSP Profile
screen). The value displayed here depends on the result of the codec negotiation
between the system and the remote VoIP device.
Possible values are:
G711a: 0
G711µ: 8
G723: 4
G729: 18
T.38: 32
G726-16: 96
G726-24: 97
G726-32: 98
G726-40: 99
This shows the voice codec currently used for receiving voice on this port. The supported
codecs can be configured in each DSP profile (in the VoIP > DSP Profile screen). The
value displayed here depends on the result of the codec negotiation between the system
and the remote VoIP device.
Possible values are:
G711a: 0
G711mu: 8
G723: 4
G729: 18
T.38: 32
G726-16: 96
G726-24: 97
G726-32: 98
G726-40: 99
This is the local IP address.
This is the remote IP address.
This is the local port used for SIP.
This is the port on the remote device used for SIP.
This shows the RTP transmission data rate.
This shows the RTP receiving data rate.
This shows the number of RTP packets that have been transmitted on this port.
This shows the number of RTP packets that have been received on this port.
This shows the average delay interval between two RTP packets transmitted.
This shows the average delay interval between two RTP packets received.
Chapter 12 Statistics Screens
461