ZyXEL Communications MSC1000G User Manual page 379

Table 178 Profile > VoIP SIP CALLSVC Screen
LABEL
Key Pattern
Local Help
Local Help Number
Reanswer Time
Index
Tel Number
Localhelp table
All
Call hold
Call wait
Call return
Call transfer
CLIP
CLIR
Do not disturb
Local Call
CIDCW
MWI
Conference
On Hook Transfer
Management Switch Card User's Guide
DESCRIPTION
Enter the name of a key pattern table for supplementary services.
The default key pattern table "DEFVAL" has the following settings:
*99#: enable DND (Do Not Disturb).
#99#: disable DND.
*43#: enable call-waiting.
#43#: disable call-waiting.
0: call-waiting reject.
1: call-waiting accept and disconnect.
2: call-waiting accept and on-hold.
3: call back on busy.
##: calling line identifier restriction.
*98#: call transfer.
*97#: call return.
#14: callin.
Select ON if you want to implement the local help feature. Select OFF if you do not
want to use the local help feature.
The local help feature allows users to call other users in the event that the connection
to the regular telephony service provider is not available. See
626 for more information on the local help feature.
Select the number of local help tables you want to use.
When using v5sip mode use this field to set the reanswer time period (0~30 seconds).
The reanswer time controls the length of time between the user hanging up the phone,
and the call being disconnected (the BYE request being sent).
Within this time, a user can pick up the receiver again, or move to another telephone
on the same line and pick up the receiver, and resume the call.
This is the local help number index number.
Enter the telephone number users dial to access the subscribers listed in the
corresponding local help table. When a user dials this number, and the connection to
the regular telephony service provider is not available, the first number in the
corresponding local help table rings. If the call is not answered, the second number in
the table rings, and so on.
Select the local help table you want users to access when they call the number in the
Tel Number field.
Select this to allow subscribers to perform any of the call functions listed below.
Select this to allow subscribers to place calls on hold.
Select this to allow subscribers to use call waiting.
Select this to allow subscribers to use call return.
Select this to allow subscribers to transfer a call to another phone number.
Select this to allow subscribers to present caller ID to the called party (Calling Line
Identification Presentation).
Select this to allow subscribers to not present caller ID to the called party (Calling Line
Identification Restriction).
Select this to allow subscribers to forbid incoming calls.
Select this to allow subscribers to make calls to other subscribers if the system's
connection to the SIP server is not available.
Select this to allow Calling Identity Delivery on Call Waiting on this call service profile.
Select this to enable the message waiting indicator for this call service profile.
Select this to have the system process three-way conference calls.
This setting controls what happens when the initiator of a conference call hangs up.
Select this option to have the conference call continue without the initiator. Clear this
option to have the conference call end with the initiator hangs up.
Chapter 11 Profile Screens
Section 16.11 on page
379