Ima Group Statistics - ZyXEL Communications MSC1000G User Manual

The following table describes the labels in this screen.
Table 248 IMA Statistics
LABEL
ID
State
Card Type
Uptime
Firmware

12.24.1 IMA Group Statistics

To view basic statistics for each IMA group on the selected IMA line card, click the slot number of
the line card in the Statistics > IMA screen.
Figure 332 IMA Statistics: IMA Line Card
The following table describes the labels in this screen.
Table 249 IMA Statistics: IMA Line Card
LABEL
Group
Available Cell Rate(Tx/
Rx)
Active Link(Tx/Rx)
Test Processing Status
TimeElapsed(secs)
Management Switch Card User's Guide
DESCRIPTION
This is the slot number of an IMA line card. Click the index number of an active line card to
display a screen that lists the current status for each port on the line card.
This field displays the line card's current operational status.
active means the line card is operating normally.
init means the MSC is initializing the line card.
disable means a manager has disabled the line card.
inactive means the line card is starting up or is not operating normally. This could be due to the
card starting, a firmware upgrade in progress or a malfunction. See
for what to do if the line card stays stuck in the inactive state.
This field displays the type of the line card.
This field displays how long the line card has been running since the last time it was started.
This field displays the current firmware version installed on the line card.
DESCRIPTION
This is the number of an IMA group. Click the number of an IMA group to display the
detailed performance statistics about the IMA group.
The is the current data transmission (Tx) or receiving (Rx) rate in bps, considering
all links in the IMA group are in active.
This field displays the number of active upstream (Tx) and downstream (Rx) links on
the IMA group.
This field displays whether the test pattern procedure is enabled or disabled on this
link and whether any links failed in the test.
This field displays the number of seconds that have elapsed since the last data
collection.
Chapter 12 Statistics Screens
Section 38.7 on page 1111
491