Ipbpvc Screen - ZyXEL Communications MSC1000G User Manual

Table 123 IPB Interface (continued)
LABEL
Slot
Port
VPI/VCI
Select
Modify
Delete
Page X of X
Previous/Next

9.19 IPBPVC Screen

Use this screen to set up and maintain PVCs for subscribers in an IP bridge.
To open this screen, click Port > IP Bridge > IPBPVC.
Figure 174 IPBPVC
Management Switch Card User's Guide
DESCRIPTION
This field displays the number of the slot where the line card is located. It displays "-" if the
MSC looks for the subscriber in the whole VLAN and not a specific PVC.
This field displays the number of the ADSL port on the line card to which the MSC forwards
frames. It displays "-" if the MSC looks for the subscriber in the whole VLAN and not a
specific PVC.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI), if any.
The VPI and VCI identify a channel on this port.
Select the radio button in the Select column for an entry and click Modify to be able to edit
the entry or Delete to remove it.
This identifies which page of information is displayed and the total number of pages of
information.
Click one of these buttons to show the preceding/following screen if the information cannot
be displayed in one screen.
Chapter 9 Subscriber Port Setup Screens
273