Syslog Screen - ZyXEL Communications MSC1000G User Manual

Chapter 14 Sys Screens

14.7 Syslog Screen

Click Sys > Unix SysLog from the navigation panel to open the following screen. The syslog
feature sends logs to an external syslog server.
Figure 394 Unix Syslog
The following table describes the labels in this screen.
Table 307 Unix Syslog
LABEL
Enable Unix
Syslog
Facility1~7
SysLog Server IP
Apply
Cancel
14.8 User Account Screen
Click Sys > User Account from the navigation panel to open the following screen. Use this screen
to manage administrator accounts.
572
DESCRIPTION
Select this check box to activate syslog (system logging) and then configure the syslog
parameters described in the following fields.
The log facility allows you to send logs to different files in the syslog server. Please refer to
the documentation of your syslog program for more details.
Enter the IP address of the syslog server for the corresponding log facility. Use an IPv4
address in dotted decimal notation or an IPv6 address and prefix in colon hexadecimal
notation.
Click Apply to save the changes in this screen to the system's volatile memory. The
system loses these changes if it is turned off or loses power, so use the Config Save link
on the navigation panel and then the Save button to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Management Switch Card User's Guide