This chapter tells you how to upload a new firmware file and how to upload and download
configuration files.
37.1 Firmware and Configuration File Maintenance
Overview
The system's built-in FTP (and SFTP) servers allow you to use any FTP (or SFTP) client (for
example, ftp.exe in Windows) to upgrade card firmware or system configuration files. The firmware
or configuration file upgrade is done during operation (run-time).
Do not interrupt the file transfer process, as it may permanently damage
your system.
Note: When you upload the MSC's firmware, the MSC automatically restarts when the
upgrade process is complete.
37.2 Filename Conventions
The configuration file contains the whole system settings in the menus such as password, IP
address, VLANs and so on. The configuration file is called "config.dat" when you obtain it from
ZyXEL and "config-0" in the system.
ZyNOS (ZyXEL Network Operating System) is the system firmware. It has a "bin" filename
extension when you get it from ZyXEL and is called "ras" in the system. With many FTP and SFTP
clients, the filenames are similar to those shown next.
ftp> put firmware.bin ras
This is a sample from a FTP session to transfer the computer file
ftp> get config-0 config.dat
This is a sample from a FTP session to transfer the MSC's current configuration file (including the
configuration files of all the line cards) to the computer file
Management Switch Card User's Guide
C
Firmware and Configuration File
HAPTER
Maintenance
firmware.bin
.
config.dat
3 7
to the MSC.
1097