ZyXEL Communications MSC1000G User Manual page 366

Chapter 11 Profile Screens
Figure 234 Alarm VDSL Profile
The following table describes the fields in this screen.
Table 171 Alarm VDSL Profile
LABEL
The top part of the screen is for profile configuration.
Name
Threshold
15 Min LOF
[0~900]
15 Min LOS
[0~900]
15 Min LOL
[0~900]
15 Min LPR
[0~900]
15 Min ES [0~900]
15 Min SESL
[0~900]
15 Min UASL
[0~900]
Init Failure Trap
Apply
366
DESCRIPTION
Type a name to identify the alarm profile (you cannot change the name of the DEFVAL
profile). You can use up to 31 English keyboard characters; spaces are not allowed.
Specify limits for the individual performance counters. The system sends an alarm trap
and generates a syslog entry when one of these thresholds is exceeded. A value of 0
disables the alarm threshold.
This field sets the limit for the number of Loss Of Frame seconds that are permitted to
occur within 15 minutes.
This field sets the limit for the number of Loss Of Signal seconds that are permitted to
occur within 15 minutes.
This field sets limit for the number of Loss Of Link seconds that are permitted to occur
within 15 minutes.
This field sets the limit for the number of Loss of Power (on the ATUR) seconds that are
permitted to occur within 15 minutes.
This field sets the limit for the number of Errored Seconds that are permitted to occur
within 15 minutes.
This field sets the limit for the number of Severely Errored Seconds that are permitted
to occur within 15 minutes.
This field sets the limit for the number of UnAvailable Seconds that are permitted to
occur within 15 minutes.
Select Enable to trigger an alarm for an initialization failure trap.
Click Apply to save the changes in this screen to the system's volatile memory. The
system loses these changes if it is turned off or loses power, so use the Config Save
link on the navigation panel and then the Save button to save your changes to the non-
volatile memory when you are done configuring.
Management Switch Card User's Guide