Table 245 Termination Statistics (continued)
LABEL
Phone State
Line State
12.22 SFP Statistics
To view statistics about the transceiver installed in an SFP slot on an MSC or Ethernet line card,
click Statistics > SFP.
Figure 329 SFP Statistics
The following table describes the labels in this screen.
Table 246 SFP Statistics
LABEL
Slot/Port
ID
Connector
Transceiver
Encoding
Name
PartNumber
Revision
SerialNumber
Management Switch Card User's Guide
DESCRIPTION
This shows whether or the phone connected to the subscriber port is on-hook or off-
hook.
This shows the current condition of the connection to the subscriber's phone.
DESCRIPTION
Select an Ethernet line card and slot number and click Load to show details.
This identifies the type of device.
This is the type of connector.
This gives details about the type of transceiver installed in the SFP slot.
This is the encoding scheme the transceiver uses.
This is the name of the transceiver vendor.
This is the part number defined by the transceiver vendor.
This is the revision level for the part number provided by the transceiver vendor.
This is the serial number provided by the transceiver vendor.
Chapter 12 Statistics Screens
487