ZyXEL Communications MSC1000G User Manual page 431

Figure 288 Port Statistics: DSL Line Card
The following table describes the labels in this screen.
Table 206 Port Statistics: DSL Line Card
LABEL
Port
Link
Name
Config Rate
Payload Rate
Protocol
Error
Rx kbps
Tx kbps
Uptime
Poll Interval(s)
Port
Stop
12.11.4.1 DSL Line Card Packet Counter
To display the packet counters of a port on a line card, click the port number in the line card's
statistics screen (see
Management Switch Card User's Guide
DESCRIPTION
This field displays the port number.
This field displays the port link status (link_down, link_up, or training).
On an SHDSL port, this field displays the wire pair setting when the port is up.
This is the descriptive name that identifies the port or the subscriber connected to the port.
This field displays the configured upstream and downstream rates.
This field displays the actual upstream and downstream rates.
This field displays the protocol with which this port is running.
This field displays the number of errors that have occurred on the port.
This field displays the receiving rate in kilo bits per second (kbps).
This field displays the transmission rate in kilo bits per second (kbps).
This field displays how long the connection is up.
The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking Set Interval.
Select a port and click Clear counter to reset the port's packet counter.
Click Stop to stop port statistic polling.
Figure 288 on page 431).
Chapter 12 Statistics Screens
431