Elc Port Statistics - ZyXEL Communications MSC1000G User Manual

12.11.5 ELC Port Statistics

Click the slot ID for an Ethernet line card in the Port Statistics screen to view Ethernet port status
and statistics.
Figure 298 ELC Port Statistics
The following table describes the labels in this screen.
Table 215 ELC Port Statistics
LABEL
Port
State
Speed/Duplex
Uptime
Poll Interval(s)
Stop
Port
12.11.6 Detailed ELC Port Statistics
To view detailed port statistics on a selected ELC port, click the port index number in the ELC port
statistics screen.
Management Switch Card User's Guide
DESCRIPTION
This field displays the slot number. Click one of these links to see detailed Ethernet port
statistics.
This field displays whether the port is connected (up) or not (down).
This field displays the type of Ethernet connection the port has (- displays when the port is
not connected).
100/Full displays when the Ethernet port has a 100 MB full-duplex connection.
100/Half displays when the Ethernet port has a 100 MB half-duplex connection.
This field displays how long the port has been running (or connected) since the last time it
was started.
The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking Set Interval.
Click Stop to stop port statistic polling.
Select a port and click Clear counter to reset the port's packet counter.
Chapter 12 Statistics Screens
453