Pvc Setup Pvlan Screen - ZyXEL Communications MSC1000G User Manual

Table 116 PVC Setup: VLAN (continued)
LABEL
The table in the bottom half of the screen lists the VLANs that the PVC is a member of.
Modify
Delete
Index
VPI/VCI
VID
Registration
Tag
Select

9.12.3 PVC Setup PVLAN Screen

Click Port > PVC in the navigation panel to open the PVC Setup screen. Click an active ADSL or
SHDSL card ID and a PVC's index number and then click the PVLAN tab to open the following
screen. This feature also applies to VDSL2 line cards since they can fall back to ADSL. Use this
screen to configure Protocol VLAN (PVLAN) settings for the PVCs. PVLAN adds a VLAN ID and IEEE
802.1p priority to a specific protocol's untagged traffic.
Figure 165 PVC Setup: PVLAN
The following table describes the fields in this screen.
Table 117 PVC Setup: PVLAN
LABEL
UP
VPI/VCI
Management Switch Card User's Guide
DESCRIPTION
Click Modify to display the selected VLAN membership entry's settings in the fields above so
you can edit them.
Click Delete to remove the selected VLAN membership entry.
This is the number of the VLAN membership entry.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI
and VCI identify the channel.
This field displays the number of a VLAN (VLAN ID) of which this channel is a member.
This field displays "fixed" to indicate that the port is a member of the specified VLAN.
This field displays "V" if the line card is to tag all frames that are transmitted out on this PVC
with this VLAN group ID. It displays "-" if the line card does not tag all frames that are
transmitted out on this PVC with this VLAN group ID.
Select the radio button of a VLAN membership entry and then use the Modify button or the
Delete button.
DESCRIPTION
Click this to return to the previous screen.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI
and VCI identify the channel.
Chapter 9 Subscriber Port Setup Screens
261