The following table describes the fields in this screen.
Table 118 Port Copy
LABEL
DESCRIPTION
Slot
Select the number of a line card's slot.
Port
Select the number of a DSL port on the line card.
PVC Only
Select this to only copy the PVC settings from one port to another or to multiple ports.
Copy
Do the following to copy settings from one DSL port to another DSL port or ports.
1. Use the Slot and Port drop-down list boxes to select the number of the DSL port from which
2. Click Copy to open the following screen.
Figure 167 Copy
3. Select a line card to which you want to copy settings.
4. Select the check boxes of the DSL ports on the line card to which you want to copy the
5. Click Apply to copy the settings to all of the ports that you have selected in this screen. Click
9.14 IP Bridge Overview
The IP bridge function is designed for large-scale, flat, access networks, and it is ideal when the
network is based on Ethernet. When the IP bridge is enabled, the system forwards frames based on
the destination IP address, instead of the destination MAC address, and it replaces the source MAC
address with its own MAC address.
Management Switch Card User's Guide
you want to copy settings.
settings. Click Select All to mark all of the port check boxes or click Select None to clear all
of the port check boxes.
Cancel to close the screen without saving changes.
Chapter 9 Subscriber Port Setup Screens
263