Kidde ARIES Installation, Operation And Maintenance Manual page 99

3-2.5.2.2.8
Step
1 Press 0 Key
2 Enter Password; Press "Enter" Key
3 Press 1 Key
4 Press 3 Key
5 Press 1 Key for ATMs or
Press 2 Key for RDCMs
Press "Enter" Key to confirm selection.
6 Use keypad to enter module to de-isolate.
Press "Enter" Key to confirm selection.
7 Press 2 Key
8 Press "Backspace" Key (as required)
3-2.5.2.2.9
Step
1 Press 0 Key
2 Enter Password; Press "Enter" Key
3 Press 1 Key
4 Press "Scroll" Key
5 Press 4 Key
6 Press 1 Key and then press "Enter" Key to confirm
selection.
7 Press 1 Key and then press "Enter" Key to confirm
selection.
8 Press "Backspace" Key (as required)
9 Press "Acknowledge" Key
P/N 06-236530-001
How to De-Isolate Remote-Annunciator Modules
Purpose: To enable previously-isolated remote-annunciator modules
to display messages or to execute activation instructions issued by the
ARIES Control Unit.
Action
How to Globally Isolate Initiating Devices
Purpose: To prevent initiating and trouble signals from all SLC-based
and IIM-based initiating devices from being processed and acted upon
by the ARIES Control Unit
Action
3-17
Result
Initiate menu access
Gain access to menus
Enter Isolate-Menu branch
Select "Control Modules" option
Select module to de-isolate
Execute De-Isolation Procedure for module
Select De-Isolation Routine
Exit Menu System
Result
Initiate menu access
Gain access to menus
Enter Isolate-Menu branch
Access additional options
Select "Global Isolate" option
Select "Inputs"
Execute Isolation Routine for all initiating devices
Exit Menu System
Silence buzzer and change Supervisory LED from
flashing to steady
August 2013