Kidde ARIES Installation, Operation And Maintenance Manual page 166

3-2.5.2.5.4
Step
1 Press 0 Key
2 Enter Password; Press "Enter" Key
3 Press 4 Key
4 Press 5 Key
5 Press 2 Key
6 Press "Backspace" Key (as required)
3-2.5.2.5.5
Step
1 Press 0 Key
2 Enter Password; Press "Enter" Key
3 Press 4 Key
4 Press 5 Key
5 Press 1 Key, then Press "Enter" Key
6 Press "Backspace" Key (as required)
3-2.5.2.5.6
Step
1 Press 0 Key
2 Enter Password; Press "Enter" Key
3 Press 4 Key
4 Press 2 Key
5 Press "Enter" Key
6 Press "Backspace" Key (as required)
August 2013
How to End Walk Test
Purpose: To terminate a walk test.
Note: The walk-test mode will automatically end after 30 minutes of
inactivity. It can also be stopped by a system reset.
Action
How to Activate a Fire Drill
Purpose: To manually activate one or more NACs and/or control
modules that are programmed for operation during a fire drill.
Note: Each NAC or control module must be programmed for drill
operation via the ARIES Configuration Program. The fire drill
must be ended via a menu operation or a system reset before
the system can be returned to normal operating condition.
Action
How to End a Fire Drill
Purpose: To manually conclude a fire drill.
Action
3-84
Result
Initiate menu access
Gain access to menus
Enter Test-Menu branch
Select "Walk Test" option
End walk test
Exit Menu System
Result
Initiate menu access
Gain access to menus
Enter Test-Menu branch
Select "Fire Drill"
Initiate fire drill
Exit Menu System
Result
Initiate menu access
Gain access to menus
Enter Test-Menu branch
Select "Fire Drill"
Stop fire drill
Exit Menu System
P/N 06-236530-001