Table of Contents
Advertisement
3-2.5.2.4.25 How to Change the Installer's Password
Step
1
Press 0 Key
2
Enter Password 186591; Press "Enter" Key
3
Press 3 Key
4
Press "Scroll" Key
5
Press 4 Key
6
Press 2 Key
7
Press 2 Key
8
Use keypad to enter new password.
Press "Enter" Key to confirm selection.
9
Use keypad to re-enter new password.
Press "Enter" Key to confirm selection
10
Press "Backspace" Key (as required)
11
Wait until "Initializing-Configuration" message
disappears from the display.
3-2.5.2.4.26 How to Run the AutoLearn Procedure
The AutoLearn Procedure shall not be used to configure a system. It is primarily
a procedure to create a database of SLC devices and to build a general-alarm
list of outputs. Owner locations are not assigned during the AutoLearn
CAUTION
Procedure.
August 2013
Purpose: To change the installer's password from its current setting.
The factory-default setting is 186591.
Action
Purpose: The primary purpose of the AutoLearn Procedure is to
execute a Registration Procedure for all currently unregistered SLC
devices.
This option registers any currently unregistered SLC devices, and if no
Event-Output-Control programming exists in the control unit's
memory, will update the general-alarm list by adding all on-board
NACs and Combination Circuits (if configured as NACs) and all SLC-
based AOs and ASMs. All general-alarm outputs are configured for
silenceable operation.
Note: The dedicated releasing circuits and combination circuits, when
programmed as releasing circuits, are never included in the
general-alarm list.
Note: Wait for each SLC device to report a "Not-Registered" trouble
message and ensure that all these trouble messages have been
acknowledged before proceeding with the AutoLearn Procedure.
3-52
Result
Initiate menu access
Gain access to menus
Enter Set-Menu branch
Access additional options
Select Programming option
Select "Passwords" option
Select Installer's option
Specify new installer's password
Confirm new installer's password
Exit Menu System
Resume Normal Operations
P/N 06-236530-001
Advertisement
Table of Contents
