Table of Contents
Advertisement
3-2.5.2.3.22 How to Determine the Control-Unit Firmware Versions
Step
1
Press 0 Key
2
Enter Password; press "Enter" Key
3
Press 2 Key
4
Press "Scroll" Key
5
Press 9 Key
6
Press "Scroll" Key
7
Press 7 Key
8
Press 1 Key for Main CPU, or
Press 2 Key for SLC Version, or
Press 3 Key for Main CPU Boot, or
Press 4 Key for SLC Boot
9
Press "Backspace" Key (optional)
10
Press "Backspace" Key (as required)
3-2.5.2.4
P/N 06-236530-001
Purpose: To determine the firmware versions resident in the control
unit.
Action
Set Menu Functions
The Set functions allow the installer to change the sensitivity settings for
SmartOne automatic initiating devices, to address and register initiating
and control devices, or to define global operating parameters such as
Global Acknowledgment of trouble and supervisory events. These
commands are also used to trigger automatic configuration routines such
as AutoLearn and AutoSetup.
For Top-Level Set Menu Functions, refer to Figure 3-4. For the complete
Set-Menu tree, refer to Figure 3-6.
The following paragraphs list the Set Menu functions.
3-31
Result
Initiate Menu Access
Gain access to menus
Enter Set-Menu branch
Access additional Menu options
Select "Globals" option
Access additional Globals-Menu options
Select "List Versions" option
View installed version of firmware
Return to Step 8 and make another selection
Exit Menu System
August 2013
Advertisement
Table of Contents
