Wiring-Harness
Connections
WHT/BLK
WHT
BLK
RED
GRN
Ground Wire from Installation Kit
Connect to lower earth-ground stud on left-
hand side of enclosure.
Or
Wiring-Harness
Connections
WHT/BLK
WHT
BLK
RED
GRN
Ground Wire from Installation Kit
Connect to lower earth-ground stud on left-
hand side of enclosure.
August 2013
Threaded hole for
3 x 10 mm
mounting screw.
The Control Unit is supplied with one of two equivalent power supplies.
Compare the terminal block wiring legend on the provided power supply
with the diagrams at left and connect the wiring harness as shown in the
applicable diagram.
Figure 2-4. Power Supply Unit
2-8
Fastening Tab
for Screw
Retention Tabs
Typ (2)
ATTENTION !
P/N 06-236530-001