Kidde ARIES Installation, Operation And Maintenance Manual page 111

3-2.5.2.3.18 How to List the Remote Display Modules Connected to this Control Unit
Step
1 Press 0 Key
2 Enter Password; Press "Enter" Key
3 Press 2 Key
4 Press "Scroll" Key twice
5 Press 9 Key
6 Press 2 Key
7 Press 1 Key for ATM or
Press 2 Key for RDCM.
Press "Enter" Key to confirm selection.
8 Press "Scroll" Key (as required)
9 Press "Backspace" Key (as required)
3-2.5.2.3.19 How to View the PSU Statu of Remote Release Modules
Step
1 Press 0 Key
2 Enter Password; Press "Enter" Key
3 Press 2 Key
4 Press "Scroll" Key twice
5 Press 9 Key
6 Press 5 Key
7 Use keypad to enter single module or range of
modules
Press "Enter" Key to confirm selection.
8 Press "Backspace" Key (as required)
P/N 06-236530-001
Purpose: To view the list of remote-display modules connected to a
ARIES Control Unit
Action
Purpose: To get diagnostic information concerning the power supply
unit status of RRM modules. Contact Kidde Technical Support if RRM
units are not functioning properly.
Action
3-29
Result
Initiate menu access
Gain access to menus
Enter List-Menu branch
Access additional options
Access "More Options"
Select "Control Modules"
Select display modules to view
Move through list of selected modules
Exit Menu System
Result
Initiate menu access
Gain access to menus
Enter Set-Menu branch
Access additional options
Select "More Options"
Select "RRM PSU Status"
Specify the RRM modules to view
Exit Menu System
August 2013