1-7.4 Notification-Appliance And Releasing Circuits; 1-7.5 Relays; 1-7.6 Auxiliary Outputs - Kidde ARIES Installation, Operation And Maintenance Manual

1-7.4 Notification-Appliance and Releasing Circuits
All circuits are power-limited except where noted.
NAC Rating
NAC Wiring
Note: NACs suitable for synchronized and non-synchronized notification appliances.
Max. Wiring Voltage Drop:
Operating Voltage:
Max. NAC Current:
Max. Rel. Ckt. Current:
Max. Current for all external devices: 5.0 A
Note: External devices include notification appliances, releasing solenoids, SLC
NAC End-of-Line Resistor:
Releasing Circuits:
1-7.5 Relays
The three programmable relays and the trouble relay can be used for either power-
limited or non-power-limited circuits. Contact ratings for these relays are:
•
•
•
1-7.6 Auxiliary Outputs
The auxiliary outputs are power limited.
•
•
•
Note: External devices include notification appliances, releasing solenoids, SLC initiating
P/N 06-236530-001
Use polarized notification appliances only. The maximum number of
synchronized devices is 25.
initiating and control devices, and all devices powered from the 24 Vdc
Auxiliary-Power Terminals (TB 2).
1.0 A @ 30 Vdc (resistive)
0.5 A @ 30 Vdc (inductive)
0.5 A @ 120 Vac (inductive).
Operating Voltage Range: 18.8 - 27.6 Vdc
Maximum Current: 1.0A (each circuit)
Maximum Current for all external devices: 5.0A
and control devices, and all devices powered from the 24 Vdc Auxiliary
Power Terminals (TB 2). All applicable compatible devices contained in this
manual may be used.
Regulated 24 Vdc
Class A, Style Z
Class B, Style Y
2 V (for NACs)
Varies (for Releasing Circuits)
Refer to Paragraph 2-9 through
Paragraph 2-11
24 Vdc (nominal)
1.5 A
2.4 A
10 K, 0.5 W
Releasing circuits are not power-limited when
actuators are used or when In-Line Device is
not used for solenoid valves
Use In-Line Device, P/N 06-220023-001, to
make a single-solenoid or dual-solenoid
releasing circuit power-limited
1-19 August 2013