Kidde ARIES Installation, Operation And Maintenance Manual page 146

3-2.5.2.4.44 How to Change a Networked Control Unit's Node Number
Ensure that this procedure does not introduce a duplicate-node address. Also
check the system programming to ensure that all other control units in the
network reference the changed node number correctly. For example, if the node
CAUTION
number was changed from 2 to 3, be sure that all other control units in the
network that react to initiating signals from this control unit have this node
number changed from 2 to 3 in their event-output-control programs. See the
Configuration Program User's Guide for event-output-control programming.
Step
1 Press 0 Key
2 Enter Password
3 Press 3 Key
4 Press "Scroll" Key
5 Press 6 Key
6 Press 2 Key
7 Use keypad to enter new node number and press
"Enter" Key to confirm selection.
8 Press "Backspace" Key (as required)
9 Wait until "Initializing Configuration" message
disappears from the display.
August 2013
Purpose: To change a control unit's network-node-number
assignment.
Action
3-64
Result
Initiate menu access
Gain access to menus
Enter Set-Menu branch
Access additional options
Select "Network" option
Select "Node Number"
Specify new node number
Exit Menu System
Initialization complete
P/N 06-236530-001