Kidde ARIES Installation, Operation And Maintenance Manual page 150

3-2.5.2.4.48 How to Enable a Networked Control Unit to be Remotely Reset by
Step
1 Press 0 Key
2 Enter Password
3 Press 3 Key
4 Press "Scroll" Key
5 Press 6 Key
6 Press "Scroll" Key
7 Press 5 Key
8 Press 1 Key and then press "Enter" Key to confirm
selection.
9 Press "Backspace" Key (as required)
10 Wait until "Initializing Configuration" message
disappears from the display.
August 2013
Another Control Unit
Purpose: To allow a networked control unit to be remotely reset by
other control units in the network. This procedure enables the control
unit to be reset as follows:
1. By any other control unit when no sub-groups are used
2. By any other control unit in its group when sub-groups are used
3. By the master mode (i.e., Group 0)
Action
3-68
Result
Initiate menu access
Gain access to menus
Enter Set-Menu branch
Access additional options
Select "Network" option
Access additional options
Select "Reset"
Select "Enable"
Exit Menu System
Initialization complete
P/N 06-236530-001