Table of Contents
Advertisement
Step
1
Press 0 Key
2
Enter Password; Press the "Enter" Key
3
Press 1 Key
4
Press "Scroll" Key
5
Press 5 Key or Press 6 Key (Installer) or
Press 6 Key or 7 Key (Owner)
6
Press 1 Key and then press "Enter" Key to confirm
selection.
7
Press "Backspace" Key (as required)
8
Press "Acknowledge" Key
3-2.5.2.2.14 How to De-Isolate Isolation Macro 1 or Isolation Macro 2
Step
1
Press 0 Key
2
Enter Password
3
Press 1 Key
4
Press "Scroll" Key
5
Press 5 Key or Press 6 Key
6
Press 2 Key and then press "Enter" Key to confirm
selection.
7
Press "Backspace" Key (as required)
3-2.5.2.3
August 2013
Action
Purpose: To de-isolate the multiple input and/or output isolations
performed via Isolation Macro 1 or Isolation Macro 2.
Action
List Menu Functions
The List functions are used to view the set of isolated initiating devices and
control unit-based and SLC-based outputs. These functions are also used
to display configuration settings for automatic initiating devices, to display
the list of devices on the SLC and on the Intelligent Interface Module and
to view lower-level events that are not displayed due to the occurrence of
higher-level events.
For Top-Level List Menu Functions, refer to Figure 3-4. For the complete
List-Menu tree, refer to Figure 3-5.
The following paragraphs describe the List Menu functions.
3-20
Result
Initiate menu access
Gain access to menus
Enter Isolate-Menu branch
Access additional options
Select "Isolation Macro 1", or
Select "Isolation Macro 2"
Execute isolation of Macro 1 or Isolation of Macro
2
Exit Menu System
Silence buzzer and change Supervisory LED from
flashing to steady
Result
Initiate menu access
Gain access to menus
Enter Isolate-Menu branch
Access additional options
Select "Isolation Macro 1"
Select "Isolation Macro 2"
Execute de-isolation of Isolation Macro 1 or
de-isolation Macro 2
Exit Menu System
P/N 06-236530-001
Advertisement
Table of Contents
