Table of Contents
Advertisement
3-2.5.2.4.13 How to Configure a Remote Release
Step
1
Press 0 Key
2
Enter Password; Press "Enter" Key
3
Press 3 Key
4
Press 3 Key
5
Press 2 Key
6
Press "Scroll" Key
7
Press 5 Key
8
Use keypad to enter single module or range of
modules to change configuration settings.
Press "Enter" Key to confirm selection.
9
Press 1 Key for solenoid or
Press 2 Key for
10
Wait until "x RRM(s) Updated" message
disappears from the display.
11
Press "Backspace" Key (as required)
P/N 06-236530-001
Purpose: To change one or more of the following Remote Release
Module (RRM) operating characteristics for a single or range of
modules: solenoid and actuator.
Action
actuator
Initiate menu access
Gain access to menus
Enter Set-Menu branch
Access "SLC Devices" option
Select "Configuration"
Access additional options
Select "Remote Release"
Specify modules to change
Specify Remote Release application.
Enable/Disable pre-alarm reporting
Exit Menu System
3-43
Result
August 2013
Advertisement
Table of Contents
