Kidde ARIES Installation, Operation And Maintenance Manual page 98

3-2.5.2.2.6
Step
1 Press 0 Key
2 Enter Password
3 Press 1 Key
4 Press "Scroll" Key
5 Press 7 Key
6 Use keypad to enter single HSSD or range of
HSSDs to de-isolate. Press "Enter" Key to confirm
selection
7 Press 2 Key and then press "Enter" Key to confirm
selection.
8 Press "Backspace" Key (as required)
3-2.5.2.2.7
Step
1 Press 0 Key
2 Enter Password; Press "Enter" Key
3 Press 1 Key
4 Press 3 Key
5 Press 1 Key for ATMs or
Press 2 Key for RDCMs
Press "Enter" Key to confirm selection.
6 Use keypad to enter module to isolate.
Press "Enter" Key to confirm selection.
7 Press 1 Key
8 Press "Backspace" Key (as required)
9 Press "Acknowledge" Key
August 2013
How to De-Isolate High-Sensitivity Smoke Detectors (HSSDs)
To enable initiating and trouble signals from previously-isolated HSSDs
connected to an IIM to be processed and acted upon by the ARIES
Control Unit.
Action
How to Isolate Remote-Annunciator Modules
Purpose: To prevent selected remote-annunciator modules from
displaying messages or from carrying out activation instructions issued
by the ARIES Control Unit.
Action
3-16
Result
Initiate menu access
Gain access to menus
Enter Isolate-Menu branch
Access additional options
Select "HSDs" option
Get prompt to Isolate or De-Isolate
Execute De-Isolation Routine for single HSSD or
range of HSSDs entered in Step 6.
Exit Menu System
Result
Initiate menu access
Gain access to menus
Enter Isolate-Menu branch
Select "Control Modules" option
Select module to isolate
Execute Isolation Procedure for module
Select Isolation Routine
Exit Menu System
Silence buzzer and change Supervisory LED from
flashing to steady
P/N 06-236530-001