Kidde ARIES Installation, Operation And Maintenance Manual page 130

3-2.5.2.4.19 How to Activate Day/Night Operation for SmartOne Smoke Detectors
Step
1 Press 0 Key
2 Enter Password; Press "Enter" Key
3 Press 3 Key
4 Press "Scroll" Key
5 Press 4 Key
6 Press 1 Key
7 Press 1 Key
8 Use keypad to enter single address or range of
smoke-detector addresses to operate via
day/night mode.
Press "Enter" Key to confirm selection.
9 Press 1 Key and then press "Enter" Key to confirm
selection.
10 Wait until the "Detectors Deactivated" message
appears on the display.
11 Press "Backspace" Key (as required)
August 2013
Purpose: To enable one or more SmartOne smoke detectors to
automatically adjust alarm thresholds by time of day.
Action
3-48
Result
Initiate menu access
Gain access to menus
Enter Set-Menu branch
Access additional options
Select "Programming" option
Select "Day/Night" option
Select option to specify range of smoke detectors
to operate in "Set Detectors"
Specify addresses to operate in day / night mode.
Enable "Day / Night" mode
Number of detectors deactivated shown.
Exit Menu System
P/N 06-236530-001