Table of Contents
Advertisement
3-2.5.2.4.47 How to Remove One or More Control Units from a Network
Check the system programming to ensure that all other networked control units
do not reference the removed control unit(s). For example, if Node 2 was
removed, be sure that all other networked control units that reacted to
initiating signals from this control unit have this node number removed from
CAUTION
their event-output-control programs. See Configuration Program User's Guide
for event-output-control programming.
Step
1
Press 0 Key
2
Enter Password
3
Press 3 Key
4
Press "Scroll" Key
5
Press 6 Key
6
Press "Scroll" Key
7
Press 4 Key
8
Press 2 Key and then press "Enter" Key to confirm
selection.
9
Use keypad to enter single node or range of
nodes and press "Enter" Key to confirm selection.
10
Press "Backspace" Key (as required)
11
Wait until "Initializing Configuration" message
disappears from the display.
P/N 06-236530-001
Purpose:
To
existing network.
Action
3-67
permanently
remove
Initiate menu access
Gain access to menus
Enter Set-Menu branch
Access additional options
Select "Network" option
Access additional options
Select "Add/Remove Nodes"
Select Remove Node
Specify node(s) to be removed and execute
procedure
Exit Menu System
Initialization complete
control
units
from
Result
August 2013
an
Advertisement
Table of Contents
