Table of Contents
Advertisement
be created for up to thirty-two (32) ARIES control units. These units perform the following
networked fire alarm and/or suppression system operations:
•
Event initiation
•
Protected premises local and/or remote event annunciation
•
Occupant notification by audible and visible signaling appliances
•
Process and equipment control to activate safety procedures
•
Fire extinguishing system release
•
Off-premises transmissions to a central station or a fire department
Each networked control unit supervises its own initiating devices and output circuits. It also
manages the input point to output circuit operations specific to its local protected area(s). These
operations occur with or without network inter-control unit communications, lack of network
communications due to catastrophic fault, or irrespective of the condition of any other control
unit in the network.
A typical networked ARIES system is shown in Figure 3-56.
P/N 06-236530-001
3-123
August 2013
Advertisement
Table of Contents
