Kidde ARIES Installation, Operation And Maintenance Manual page 8

Fire alarm/suppression
Table of Contents

Advertisement

NOTICE TO USERS, INSTALLERS, AUTHORITIES HAVING JURISDICTION AND ALL OTHER
This product incorporates field-programmable software. In order for the product to comply with the require-
ments in the Standard for Control Units and Accessories for Fire Alarm Systems, UL 864, certain programming
features or options must be limited to specific values or not used at all as indicated below:
Program Feature or Option
Ionization Detectors reporting as
supervisory initiating devices
Photoelectric Detectors reporting
as supervisory initiating devices
Abort switches may be set up to
operate in any of the following
ways:
1. Reset to initial delay setting.
Resume countdown for entire
delay period.
2. Count down to 10 seconds and
hold. Resume countdown at
10 seconds.
3. Hold at time remaining.
Resume countdown at remain-
ing time period.
4.
Same as #2, except disable
abort function if countdown
timer has started.
5. Special New York City opera-
tion.
Delayed off premises trouble
transmissions for AC power loss.
Monitor module acting as a
silence switch.
Monitor module acting as an
acknowledge switch.
Network Settings
Network Reset Event
August 2013
INVOLVED PARTIES
Permitted in
Possible Settings
UL 864(Y/N)
N
0.5 – 1.5% per foot
N
0.5 – 3.5% per foot
Y (#2 only)
1 – 300 second delay
Y
0 – 12 hours
Y
May be used as a stand
alone initiating device, or
may be used with visible
indication that shows when
outputs are silenced.
Y
May be used as a stand
alone initiating device, or
may be used with a display
that shows when events
are being acknowledged.
N
'Check' to enable remote
Reset. No 'Check' to dis-
able remote Reset.
vi
Settings Permitted in
UL 864
Report as alarm initiating
devices only
Report as alarm initiating
devices only
1 – 60 second delay
0 – 3 hours
Must have visible indica-
tion at monitor module
that outputs have been
silenced.
Must have visible display
at monitor module that
shows what is being
acknowledged.
'Check' to enable remote
Reset.
P/N 06-236530-001

Advertisement

Table of Contents
loading

Table of Contents