Positive Alarm Sequence - Kidde ARIES Installation, Operation And Maintenance Manual

3-2.5.2.4.32 How to De-Activate Positive-Alarm Sequence for Smoke Detectors
Step
1 Press 0 Key
2 Enter Password; Press "Enter" Key
3 Press 3 Key
4 Press "Scroll" Key
5 Press 4 Key
6 Press "Scroll" Key
7 Press 6 Key
8 Press 2 Key and then press "Enter" Key to confirm
selection.
9 Use keypad to enter single address or range of
smoke-detector addresses for PAS to be de-
activated.
Press "Enter" Key to confirm selection.
10 Press "Backspace" Key (as required)
11 Wait until "Initializing Configuration" message
disappears from the display.
3-2.5.2.4.33 How to Clear the System Event Log
Step
1 Press 0 Key
2 Enter Password; Press "Enter" Key
3 Press 3 Key
4 Press "Scroll" Key
5 Press 4 Key
6 Press "Scroll" Key twice
7 Press 7 Key
8 Press 1 Key and then press "Enter" Key to confirm
selection.
9 Wail until "Event Log Clear in Progress" message
disappears from the display.
10 Press "Backspace" Key (as required)
P/N 06-236530-001
Purpose: To de-activate positive-alarm sequence for one or more
smoke detectors. See Paragraph 3-2.5.5.1 for the description of
positive-alarm sequence.
Action
Purpose: To remove all previously recorded system events from the
ARIES event log.
Action
3-57
Result
Initiate menu access
Gain access to menus
Enter Set-Menu branch
Access additional options
Select Programming option
Access additional options
Select "Positive-Alarm Sequence"
De-activate positive-alarm sequence
Specify addresses for positive-alarm sequence to
be de-activated
Exit Menu System
Resume Normal Operations
Result
Initiate menu access
Gain access to menus
Enter Set-Menu branch
Access additional options
Select Programming option
Access additional options
Select "Clear Events"
Select and clear system event log
Exit Menu System
August 2013