Kidde ARIES Installation, Operation And Maintenance Manual page 115

3-2.5.2.4.3
Step
1 Press 0 Key
2 Enter Password; Press "Enter" Key
3 Press 3 Key
4 Press 1 Key
5 Press 1 Key
6 Press "Backspace" Key (as required)
3-2.5.2.4.4
Step
1 Press 0 Key
2 Enter Password; Press "Enter" Key
3 Press 3 Key
4 Press 9 Key
5 Press 2 Key
6 Press "Backspace" Key (as required)
P/N 06-236530-001
How to Set the Display to Show the Standby-Battery Condition
Purpose: To replace the "System Status Normal" message on the
display with the standby-battery charging voltage and current. The
display will have the following typical appearance:
PS: 25.5 V 1 mA
North Communications Center
Action
How to Set the Display to Not Show the Standby-Battery Condition
Purpose: To replace the standby-battery charging voltage and current
with the "System Status Normal" message on the display.
Action
3-33
02:15 PM 07/02/04
Result
Initiate menu access
Gain access to menus
Enter Set-Menu branch
Access "Time / Date" option
Enable battery-charging display
Exit Menu System
Result
Initiate menu access
Gain access to menus
Enter Set-Menu branch
Access "Battery" option
Disable battery-charging display
Exit Menu System
August 2013