Kidde ARIES Installation, Operation And Maintenance Manual page 105

Fire alarm/suppression
Table of Contents

Advertisement

3-2.5.2.3.6
Step
1
Press 0 Key
2
Enter Password; Press "Enter" Key
3
Press 2 Key
4
Press 3 Key
5
Enter Start Address and End Address. Use XXX
format for address.
Press "Enter" Key to confirm address selection.
6
Press "Scroll" Key (as required)
7
Press "Backspace" Key (as required)
3-2.5.2.3.7
Step
1
Press 0 Key
2
Enter Password; Press "Enter" Key
3
Press 2 Key
4
Press "Scroll" Key
5
Press 4 Key
6
Press 1 Key for Pre-Alarm Events or
Press 2 Key for Alarm Events or
Press 3 Key for Supervisory Events or
Press 4 Key for Trouble Events.
7
Press "Scroll" Key (as required)
8
Press "Backspace" Key (as required)
P/N 06-236530-001
How to List a Range of Automatic Detector Sensitivity Settings
Purpose: To view the pre-alarm and alarm thresholds for a range of
automatic detectors and to view the fire signatures being currently
measured by the detectors. This procedure fulfills the intent of NFPA
72 (2002) Paragraph 10.4.3.2.4, Part (4) as a test to ensure that each
smoke detector is within its listed and marked sensitivity range.
Action
How to List Active Events
Purpose: To view the list of active events by event type. Use this option
to view lower-level events such as trouble events whose display is
suppressed by the concurrent occurrence of higher-level events.
Action
3-23
Result
Initiate menu access
Gain access to menus
Enter List-Menu branch
Access "Detector Level" option
View detectors' pre-alarm and alarm thresholds
and levels of fire signatures being measured.
Format for smoke detectors is:
Addr TP Pre-Alm Alm
Level
Format for heat detectors is:
Addr. TP Pre-Alm
Level
where:
"Addr" is the device address
"TP" is the device type
"Pre-Alm" is pre-alarm setting in either %/Ft. or
°F
"Alm" is alarm setting in either %/Ft. or °F
"Level" is current reading in either %/Ft. or °F
Move through list of selected detectors
Exit Menu System
Result
Initiate menu access
Gain access to menus
Enter List-Menu branch
Access additional options
Access "Active Events" option
Select event type to view
Move through list of selected events
Exit Menu System
August 2013

Advertisement

Table of Contents
loading

Table of Contents