3-2.2 Outputs Activation; 3-2.3 Operator Keys - Kidde ARIES Installation, Operation And Maintenance Manual

3-2.2 Outputs Activation
The ARIES System operation is control by events. Control-unit-based or signaling-
line-circuit-based outputs are activated by user-specified operating instructions
contained in the system's event output control (EOC) program. The EOC program is
triggered by any event that transitions the system from the Normal Mode to an
event-driven, Off-Normal operating state.
Note: All alarm events must be annunciated by public-mode notification.
3-2.3 Operator Keys
Operator keys for the ARIES System are located on the display inside the control unit.
The control unit door must be open to access the operator keys.
Figure 3-1 shows the location of the operator keys and status indicating LEDs on the
display. Table 3-2 lists the names and functions of the operator keys on the display.
AC POWER
ALARM
PRE-ALARM
August 2013
SYSTEM
SYSTEM TROUBLE
ACKNOWLEDGE
SUPERVISORY
SYSTEM
SILENCE RESET
1 2 3 4
6 7 8 9
System Status LEDs
Figure 3-1. Display Panel
3-2
80 Character
Liquid Crystal Display
with LED Back Lighting
(2 Lines X 40 Characters)
SILENCE
Operator Control Keys
SCROLL
BACKSPACE Key
5
ENTER Key
0
12-key numeric / BACKSPACE /
ENTER keypad
P/N 06-236530-001