Fiber-Optic Converter Card - Kidde ARIES Installation, Operation And Maintenance Manual

Fire alarm/suppression
Table of Contents

Advertisement

2-18

FIBER-OPTIC CONVERTER CARD

The Fiber-Optic Converter Card allows networked ARIES Control Units to be interconnected
using fiber-optic medium. Use one OCC to terminate each end of a fiber-optic communications-
channel(s) segment. The ARIES networking structure supports a mixture of fiber-optic and
twisted-wire interconnections among networked control units.
Specifications for the Fiber-Optic Converter Card are provided in Table 2-4.
Description
Part Number
Weight
Finish
Input Voltage
Input Current
Electrical Connections
Fiber-Optic Connections
Data Ports
Baud Rate
Optical Link Distance
Temperature Range
Humidity Range
The OCC Cabinet should be located as required in the same room as its parent Control Unit for
convenient wiring connections (24 VDC and RS485 communications).
Typical Class-B, Style-4 and Class-A, Style-7 interconnections using a mixture of media are
shown in Figures 2-36 through 2-39.
Figure 2-36 shows a typical single-channel system using 62.5/125 m duplex fiber-optic media.
August 2013
Table 2-4. Fiber-Optic Converter Card Specification
74-600000-006
3.3 lb/1.5 Kg
Dark Blue (Color 35044 of Fed Std 595A)
24 VDC Nominal, 18 VDC Min, 28 VDC Max
NOTE: Must be connected to a power supply listed for fire-protective signaling
use only.
200 mA Max
UL Recognized Terminal Blocks for wire size 26 – 12 AWG
Type 'ST'
EIA/TIA-485
9600 Baud
5280 ft (With no more than 4 dB/km cable attenuation)
0 – 50 Deg C
0 – 93% RH, non-condensing
Specification
2-34
P/N 06-236530-001

Advertisement

Table of Contents
loading

Table of Contents